6 Great Ways to Maintain a Drainage System


Your home’s foundation is the drainage system. Without an effective drainage system, the building may collapse. The drainage system operates 24×7 to carry away water, assimilate wastewater, and remove any other liquids that enter the building. The drainage system also prevents flooding.

Many factors affect the drainage system. Inspecting the drainage system on a regular basis and maintaining it are crucial to keeping your home healthy. You may not even know when something has gone wrong. However, with a few simple maintenance tips, you can keep your drainage system in tip-top shape. Here are 6 ways you can maintain your drainage system.

Keep the drains clear

If the drains are clogged, the water will not flow through. As a result, you will have to pour a lot of water down the drain, which can cause damage. It’s important for drain cleaning Phoenix to clear drains so water can flow through easily.

Drip edge guard

Drip edge is an important part of a home’s foundation. It’s the border where your wall meets the floor or ceiling and it keeps water from seeping in. Drip edges can be difficult to see, but your drain cleaning Phoenix should check them often.

If water accumulates on your drip edge, it will leak into walls and other areas of the house below. When that happens, the entire drainage system is affected. If you want to avoid this, make sure that your drip edge has no cracks or gaps where water can accumulate.

Install an overflow valve

Installing an overflow valve is one of the best ways to maintain your drainage system. An overflow valve allows excess water to spill out of the line, preventing flooding and any other damage.

Back up the gas

Before your plumber Tempe anything else, make sure your gas is turned off at the main line and all other appliances.

Maintain the tile

The drainage system is made up of various components, including slabs and tile. When one tile becomes damaged or cracked, it may cause the rest of the drainage system to malfunction.

If you see a loose tile on your floor, it’s important that your plumber Tempe inspect the drainage system. If water is pooling around the tile, it’s time to replace it.

 Installing a grinder

Installing a grinder pump is one way to maintain your drainage system. This pump removes dirt, sand, and sediment from the water to prevent clogging. When the water leaves the drainage system, it will run smoothly.

A grinder pump is typically located near the main sewer line. It can be installed next to your home or in an area that has easy access for servicing it if needed. Installing a grinder pump usually costs less than $250 and you can purchase pre-fabricated systems for about $1,000 if you don’t want to build one yourself.

A key benefit of installing a grinder pump is that it uses less electricity than other types of pumps. It also operates silently and doesn’t require any maintenance aside from routine inspections. This results in lower energy bills and a longer lifespan for the machine itself.

Final Thoughts

Before you touch the drainage system, it’s important to know what is in your home. Ask the licensed plumber Phoenix to Check for leaks and make sure there are no contaminants that may have entered the system.

Once you have a plan of action, follow the steps to complete each phase of the process.

-Check for leaks

-Identify problems

-Fix any problems

-Replace water lines

-Plumb in new water lines

-Put down drain liners